Horner-apg XL6 OCS HEXT351C112 Manuel d'utilisateur télécharger pdf

MAN0884-04-EN Specifications / Installation

__________________________________________________________________________________________________________________________________________________________________________

3/2/2010 Page 1 of 4 #1037

1 Specifications

Specifications

Required

Power

(Steady

state)

500 mA @ 24 VDC

Required

Power

(Inrush)

30 A for 1 ms @ 24 VDC – DC Switched

2.5 A for 4 ms @ 24 VDC - AC Switched

Primary

Power

Range

10 – 30 VDC

Relative

Humidity

5 to 95% Non-condensing

Clock

Accuracy

+/- 35 ppm maximum at 25°

(+/- 1.53 Minutes per Month)

Operating

Temp

-10°C to +60°C

Display

Type

5.7” QVGA TFT

Display Size 5.7”

Display

Screen

Dimension

320 x 240

Display

Memory

2.75 MB

Display Life Minimum 40000 hours (50% brightness, 25 deg C)

User Keys 5 user-defined Function keys and a System Key

Screens

supported

1023

Colors 32768/ 16 shade Grey scale (XL6M models only)

Weight 26.5 oz. (.751 kg)

USA:

http://www.heapg.com/Pages/TechSupport/ProductCert.ht

Europe:

http://www.horner-apg.com/en/support/certification.aspx

Connectivity

Serial Ports 2 Serial Ports – RS232 & RS485

Ethernet 10/100-Mbps (XL6e models only)

USB

USB Networking Port for communication with PCs, flash

device connectivity and programming Port

Removable

Media

Removable Media for upto 2 GB of storage for programs,

data logging or screen capture

Smartstix Remote IO modules communicating on CAN

2 Installation

1. Prior to mounting, observe requirements for the panel layout design and

spacing/clearances in the OCS XL6 Series Manual (MAN0883).

2. Cut the host panel.

3. Insert the OCS through the panel cutout (from the front). The gasket

material needs to be between the host panel and the OCS.

4. Install and tighten the mounting clips (provided with the OCS) until the

gasket material forms a tight seal.

5. Connect cables as needed such as communications, programming, power

and CsCAN cables to the ports using the provided connectors.

6. Begin configuration procedures.

3 Panel Cut-Out and Dimensions

Note: Max. panel thickness: 5 mm.

Refer to the User Manual (MAN0883) for panel box information and a checklist of requirements.

Mounting clips

XL6/XL6M/XL6e OCS Models

HE-XL100 / HE-XL1M0 / HEXT350C100 / HEXT280C100

HE-XL1E0 / HEXT351C100

Caution: Do

not

force the OCS into the panel cutout.

An incorrectly sized panel cutout can damage the

touch screen.

Note: The tolerance to meet NEMA standards is

0.005” (0.1 mm).

6.875”

[175mm]

[131mm]

001OCS003-R1

5.156”

R .125” [3 mm] TYP.

RADIUS CORNERS

WHEN REQUIRING

DUST OR WATER

TIGHT SEAL PER

NEMA 4, 4X OR 12

001XLQX007

1 2 3 4

Résumé du contenu

Page 1 - XL6/XL6M/XL6e OCS Models

MAN0884-04-EN Specifications / Installation ____________________________________________________________________________________________

Page 2

MAN0884-04-EN Specifications / Installation ____________________________________________________________________________________________

Page 3 - Signal Direction

MAN0884-04-EN Specifications / Installation ____________________________________________________________________________________________

Page 4

MAN0884-04-EN Specifications / Installation ____________________________________________________________________________________________

Plus de documents pour Capteurs Horner-apg XL6 OCS HEXT351C112

Voir le document Horner-apg XL6 OCS HEXT351C112 Manuel d'utilisateur

Horner-apg XL6 OCS HEXT351C112 Manuel d'utilisateur (6 pages)

Commentaires sur ces manuels

Pas de commentaire

Horner-apg XL6 OCS HEXT351C112 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Horner-apg XL6 OCS HEXT351C112. Horner APG XL6 OCS HEXT351C112 User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Capteurs Horner-apg XL6 OCS HEXT351C112

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Horner-apg XL6 OCS HEXT351C112