Horner-apg XL6 OCS HEXT280C114 Manuel d'utilisateur télécharger pdf (Page 2)

MAN0886-04-EN Specifications / Installation

__________________________________________________________________________________________________________________________________________________________________

3/2/2010 Page 2 of 6 #1037

2 Installation

1. Prior to mounting, observe requirements for the panel layout

design and spacing/clearances in the OCS XL6 Series Manual

(MAN0883).

2. Cut the host panel.

3. Insert the OCS through the panel cutout (from the front). The

gasket material needs to be between the host panel and the

OCS.

4. Install and tighten the mounting clips (provided with the OCS)

until the gasket material forms a tight seal.

5. Connect cables as needed such as communications,

programming, power and CsCAN cables to the ports using the

provided connectors.

6. Begin configuration procedures.

3 Panel Cut-Out and Dimensions

Note: Max. panel thickness: 5 mm.

Refer to the XL6 User Manual (MAN0883) for panel box information and a handy checklist of

requirements.

Note: The tolerance to meet NEMA standards is

0.005” (0.1 mm).

Caution: Do

not

force the OCS into the panel cutout.

An incorrectly sized panel cutout can damage the

touch screen.

HE-XL1x3/ HE-XL1x4

001XLQX007

6.875”

[175mm]

[131mm]

001OCS003-R1

5.156”

R .125” [3 mm] TYP.

RADIUS CORNERS

WHEN REQUIRING

DUST OR WATER

TIGHT SEAL PER

NEMA 4, 4X OR 12

1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire

Horner-apg XL6 OCS HEXT280C114 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Horner-apg XL6 OCS HEXT280C114