Horner-apg QX651 OCS Manuel d'utilisateur télécharger pdf (Page 69)

MAN0798-04-EN CH. 12

August 20, 2009 Page 69 of 95 ECN # 979

CHAPTER 12: CSCAPE CONFIGURATION

12.1 Overview

QX hardware is programmed with a Windows-based PC application called Cscape (HE500OSW232).

Please see the on-line help provided with Cscape for additional details.

12.2 Cscape Status Bar

When the QX is connected to a PC using Cscape software a Status Bar appears at the bottom of the

screen. The Cscape Status Bar can be used to determine if communications have been established

between the QX and the Cscape program. Components of the Cscape Status Bar are explained in

Figure 4.1.

Ready User: NONE HEQX451 BP43 (Model=) Equal Local :1 Target :2(R) [no forces] MOD

Equal Indicator – indicates whether the current program in Cscape is equal to the program

stored in the Target Controller.

• If Equal, the program in Cscape is the same as the program stored in the Target Controller.

• If Not Equal, the program in Cscape is not

the same as the program stored in the Target

Controller.

• If Unknown, there may have been a change since the last time the program in Cscape was

compared to the Target Controller.

Communications Status - indicates the current status of the

“pass through” Connector.

• Local: xx – indicates the Network ID of the QX to which the

Cscape program is physically connected through its serial

port. It can serve as a pass through device to other nodes

on the network.

• Target: yy(R) – indicates the Network ID of the device with

which the Cscape program is exchanging data.

Note: The Local unit and Target unit can be the

same unit or they can be separate units.

The following are status indicators:

(R) – Running

(D) - Do I/o

(I) – Idle

(?) – Cscape is not communicating with the remote unit.

[no forces] – indicates no I/O has been forced.

Message Line -

The contents of

these messages

are context

sensitive. The

Message line can

be empty.

Current User -

indicates who is logged

(for security purposes).

Controller Model - (Model Confirmation)

• Controller Model indicates the controller model for

which the program in Cscape is configured.

• (Model Confirmation) provides the following

indications:

• (Model=) - the actual Target Controller matches the

configured Controller Model and Network.

• (Model Not=) – the actual Target Controller does not

match the configured Controller Model and Network.

• (Model ?) – there may have been a change since the

last time the Target Controller was compared to the

configured Controller Model and Network.

File Modified Indicator - indicates that the file in

the selected window has been modified but has

not been saved.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 94 95

Commentaires sur ces manuels

Pas de commentaire

Horner-apg QX651 OCS Manuel d'utilisateur Page 69

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Horner-apg QX651 OCS