Horner-apg QX651 OCS Manuel d'utilisateur télécharger pdf (Page 32)

CH. 7 MAN0798-04-EN

August 20, 2009 Page 32 of 95 ECN # 979

Double-click on a slot or press the Config button located next to the slot. The following screen

appears. Select a tab at the top of the screen, and then select an I/O module. (For this example,

the DIQ612 is going to be selected.) Press OK.

Figure 7-5 – Selecting an I/O Module

4. The following screen appears.

Figure 7-6 – Base 2 with an I/O Module Selected

The description and properties of the I/O module are provided. If satisfied with the selections,

press OK.

Note: If a module already occupies a slot and a different module is desired, right-click on the

slot and press Replace. To leave a slot empty, right-click on the slot and press Delete. By

right-clicking on a slot, its configuration can be copied into another slot on the same base (or

a different base) and pasted into a new slot.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 94 95

Pas de commentaire

Horner-apg QX651 OCS Manuel d'utilisateur Page 32