Horner-apg QX351 OCS HEQX351C103 Manuel d'utilisateur télécharger pdf (Page 76)

CH. 13 MAN0892-03-EN

February 25, 2010 Page 76 of 109 # 1039

13.3 Establishing Communications

The preferred method of communicating between Cscape and a QX351 is via USB port. The QX351

OCS can communicate with Cscape using USB to USB, USB to serial adapters, serial port

communications via MJ1/MJ2 Port, onboard Ethernet Port, CAN (CsCAN) or modems. For

communications other than USB or the MJ1/MJ2 port please refer to the manual which ships with the

communications adapter hardware being used for programming.

13.3.1 To connect QX351 with USB port: (Preferred method)

Connect a PC’s (Personal Computer running a Windows Microsoft operating system) USB port via USB

cable to the USB mini B port on the QX351 OCS.

The PC will detect a new device has been plugged into the USB port.

Figure 13.1: Front Panel and USB Programming Connector

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 108 109

Pas de commentaire

Horner-apg QX351 OCS HEQX351C103 Manuel d'utilisateur Page 76