Horner-apg QX351 OCS HEQX351C103 Manuel d'utilisateur télécharger pdf (Page 56)

CH.10 MAN0892-03-EN

February 25, 2010 Page 56 of 109 # 1039

Load Clone

Selecting “Clone Unit” menu will open the following menu screen. Select “Load Clone”.

NOTE: For security enabled files, Load clone asks for password validation before loading the application.

10.4 Touch screen calibration

The touch screen is calibrated at the factory and rarely needs modification. However, if actual touch

locations do not appear to correspond with responding objects on the display, field adjustment is

available. To access the field adjustable touch screen calibration dialog, press and hold both the SYS

and F1 key for longer than 2 seconds and a dialog similar to figure 9.2 should appear. Thereafter, use a

plastic tip stylus and follow the dialog instructions.

Note that special system keys may be locked out from user access. If the SYS-F1 combination

does NOT respond, verify that the system menu’s Set Fkeys sub-menu’s parameter SYS_Fn is

enabled.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 108 109

Pas de commentaire

Horner-apg QX351 OCS HEQX351C103 Manuel d'utilisateur Page 56