Horner-apg XL10e OCS Built-in I/O Model 5 I/O Manuel d'utilisateur télécharger pdf

MAN0953-02-EN Specifications / Installation

1/6/2011 Page 1 of 4

1 Specifications

Specifications

Digital DC Inputs

Digital DC Outputs

Inputs per Module

12 including 4 configurable HSC inputs

Outputs per Module

12 including 2 configurable PWM outputs

Commons per Module

Input Voltage Range

12 VDC / 24 VDC

Output Type

Sourcing / 10 K Pull-Down

Absolute Max. Voltage

35 VDC Max.

Absolute Max. Voltage

28 VDC Max.

Input Impedance

10 kΩ

Output Protection

Short Circuit

Input Current

Positive Logic

Negative Logic

Max. Output Current per point

0.5 A

Upper Threshold

0.8 mA

-1.6 mA

Max. Total Current

4 A Continuous

Lower Threshold

0.3 mA

-2.1 mA

Max. Output Supply Voltage

30 VDC

Max Upper Threshold

8 VDC

Minimum Output Supply Voltage

10 VDC

Min Lower Threshold

3 VDC

Max. Voltage Drop at Rated Current

0.25 VDC

OFF to ON Response

1 ms

Max. Inrush Current

650 mA per channel

ON to OFF Response

1 ms

Min. Load

None

OFF to ON Response

1 ms

ON to OFF Response

1 ms

HSC Max. Switching Rate

10 kHz Totalizer/Pulse, Edges

5 kHz Frequency/Pulse, Width

2.5 kHz Quadrature

Output Characteristics

Current Sourcing (Positive Logic)

Analog Inputs, High Resolution

Number of Channels

Thermocouple

Temperature Range

B / R / S

2912°F to 32.0°F (1600°C to 0°C)

1652°F to -328°F (900°C to -200°C)

Input Ranges

(Selectable)

0 - 10 VDC

0 – 20 mA

4 – 20 mA

100mV

PT100 RTD,

and J, K, N, T, E, R, S, B Thermocouples

752.0°F to -400.0°F (400°C to -240°C)

1382.0°F to -346.0°F (750°C to -210°C)

K / N

2498.0°F to -400°F (1370°C to -240°C)

Safe input voltage range

10 VDC: -0.5 V to +15 V

20 mA: -0.5 V to +6 V

RTD / T/C: ±24 VDC

Thermocouple Common Mode Range

±10V

Nominal Resolution

10V, 20mA, 100mV: 14 Bits

RTD, Thermocouple: 16 Bits

Converter Type

Delta Sigma

Max. Error at 25°C

(*excluding zero)

*4-20 mA ±0.10%*

*0-20 mA ±0.10%*

*0-10 VDC ±0.10%*

RTD (PT100) ±1.0 °C

0-100 mV ±0.05%

Input Impedance

(Clamped @ -0.5 VDC to 12

VDC)

Current Mode:

100 Ω, 35mA Max. Continuous

Voltage Mode:

500 kΩ, 35mA Max. Continuous

Max Thermocouple Error

(After Warm Up Time of One Hour)

±0.2% (±0.3% below -100°C)

%AI full scale

10 V, 20 mA, 100 mV: 32,000 counts full scale.

RTD / T/C: 20 counts / °C

Conversion Speed, Both Channels

Converted

10V, 20mA, 100mV: 30 Times/Second

RTD, Thermocouple: 7.5 Times/Second

Max. Over-Current

35 mA

Conversion Time per Channel

10V, 20mA, 100mV: 16.7mS

RTD, Thermocouple: 66.7mS

Open Thermocouple Detect

Current

50 nA

RTD Excitation Current

250 µA

Analog Outputs

Number of Channels

Minimum 10 V load

1 kΩ

Output Ranges

0-10 VDC, 0-20 mA

Maximum 20 mA load

500 Ω

Nominal Resolution

12 Bits

Analog Outputs; Output Points Required

Update rate

Once per PLC scan

Maximum Error at 25°C (excluding zero)

0.1%

Additional error for temperatures other than 25°C

0.01% / °C

2 Wiring and Jumpers

XL Series Built-in I/O – Model 5 I/O

12 DC Inputs, 12 DC Outputs, 2 Universal Analog In & 2 Analog Out

for XLe, XLt, XL6 (all models) and XL10e

Wiring Specifications

For I/O wiring (discrete), use the following wire type or

equivalent: Belden 9918, 18 AWG (0.8 mm

) or larger.

For shielded Analog I/O wiring, use the following wire type or

equivalent: Belden 8441, 18 AWG (0.8 mm

) or larger.

For CAN wiring, use the following wire type or equivalent:

Belden 3084, 24 AWG (0.2 mm

) or larger.

Use copper conductors in field wiring only, 60/75° C

Location of I/O jumpers

(JP1, JP2, JP3 & JP4) and

wiring connectors

(J1, J2 & J3) with back cover

removed.

Jumper Location Details

1 2 3 4

0-10VDC 2

Résumé du contenu

Page 1

MAN0953-02-EN Specifications / Installat

Page 2 - 0-10VDC

MAN0953-02-EN Specifications / Installat

Page 3

MAN0953-02-EN Specifications / Installat

Page 4

MAN0953-02-EN Specifications / Installat

Commentaires sur ces manuels

Pas de commentaire

Horner-apg XL10e OCS Built-in I/O Model 5 I/O Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Horner-apg XL10e OCS Built-in I/O Model 5 I/O. Horner APG XL10e OCS Built-in I/O Model 5 I/O User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Horner-apg XL10e OCS Built-in I/O Model 5 I/O