Horner-apg Text OCS OCS110 Manuel d'utilisateur télécharger pdf (Page 2)

PAGE 2 26 JUL 2004 MAN0416-04

2 INSTALLATION

2.1 Panel Cut-Out

Figure 1 – Panel Cut-Out for the OCS100/110

2.2 Ports, Connectors and Wiring

2.2.1 Primary Power Port

Table 2 – Primary Power Port Pins

Pin Signal Description

1 V+ Input power supply voltage

2 V- Input power supply ground

Note: Power Supply Voltage Range is from 10-30 VDC.

Figure 2 Power Connector Figure 3 As viewed looking at

(Primary Power Port) the OCS models

Pin 2

Pin 1

Pin 2 Pin 1

Warning: To provide maximum noise immunity and to ensure minimum EMI radiation, the V-

signal (DC power return) need to be connected to earth ground at the power supply. The user must

ensure that the power supply selected is compatible with this method of grounding.

.062 (1.57mm)R.

TYP.

.280 (7.10mm)

7.151

(181.63mm)

3.730

(94.74mm)

3.730

(94.74mm)

3/16 (4.76mm) DRILL THRU

3.312

(84.11mm)

3.643

(92.53mm)

0.207 (5.25mm)

001OCS023

1 2 3 4 5 6

Pas de commentaire

Horner-apg Text OCS OCS110 Manuel d'utilisateur Page 2