Horner-apg SmartStack I/O HE-DIQ712 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Horner-apg SmartStack I/O HE-DIQ712. Horner APG SmartStack I/O HE-DIQ712 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 10
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
MAN0316-08 10 NOV 2006 PAGE 1
DIQ712
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
This datasheet also covers products starting with IC300.
1 SPECIFICATIONS
INPUT DIQ712
DIQ712
Inputs per Module 14 Minimum ON Current 1 mA
Commons per
Module
3
Maximum OFF Current
200 µA
Input Voltage Range 12/24 VDC OFF to ON Response 1 ms.
Peak Voltage 35 VDC Max. ON to OFF Response 1 ms.
ON Voltage level Min. 9 VDC
OFF Voltage level Max. 3 VDC
Input Impedance
> 10 K
Isolation
(Channel to Ground)
500 VDC
OUTPUT DIQ712
DIQ712
Outputs per Module 10 relay Maximum Inrush Current 3 A
Commons per
Module
2
Minimum Load None
Output Type Relay OFF to ON Response 6 ms. Typical
Coil Voltage 18–30 VDC ON to OFF Response .3 ms. Typical
Contact Voltage
250 VAC / 30 VDC Max.
Isolation (Common to
Common and Common
to Bus)
2500 VDC
ON Voltage drop 0.2 V Max.
Maximum Leakage
Current
5 µA
Maximum Load
current (resistive) per
output
3 A
See Derating Chart
General Specifications
Required Power
(Steady State)
0.19 W(8 mA @ 24 VDC)
Operating
Temperature
0°–60° Celsius
Required Power (Inrush) Negligible Terminal Type Spring Clamp, Removable
Relative Humidity 5–95% Non-condensing Weight 9.5 oz. (256 g)
CE
UL
See Compliance Table at http://www.heapg.com/Support/compliance.htm
Mixed I/O Module
HE800DIQ712 / HE-DIQ712*
12/24 Vdc In, Positive/Negative Logic
3A Relay Out
* HE- Denotes plastic case.
Vue de la page 0
1 2 3 4 5 6 7 8 9 10

Résumé du contenu

Page 1 - Mixed I/O Module

MAN0316-08 10 NOV 2006 PAGE 1 DIQ712 Information is subject to change without notice. SmartStack

Page 2 - 2 WIRING

PAGE 10 10 NOV 2006 MAN0316-08 DIQ712 Information is subject to change without notice. SmartSta

Page 3 - Corresponding I/O Pin

PAGE 2 10 NOV 2006 MAN0316-08 DIQ712 Information is subject to change without notice. SmartStac

Page 4

MAN0316-08 10 NOV 2006 PAGE 3 DIQ712 Information is subject to change without notice. SmartStack

Page 5 - 4 CONFIGURATION

PAGE 4 10 NOV 2006 MAN0316-08 DIQ712 Information is subject to change without notice. SmartStac

Page 6 - .1(±15%) V-A

MAN0316-08 10 NOV 2006 PAGE 5 DIQ712 Information is subject to change without notice. SmartStack

Page 7 - 6 INSTALLATION / SAFETY

PAGE 6 10 NOV 2006 MAN0316-08 DIQ712 Information is subject to change without notice. SmartStac

Page 8

MAN0316-08 10 NOV 2006 PAGE 7 DIQ712 Information is subject to change without notice. SmartStack

Page 9 - 7 ADDITIONAL REFERENCES

PAGE 8 10 NOV 2006 MAN0316-08 DIQ712 Information is subject to change without notice. SmartStac

Page 10 - 8 TECHNICAL SUPPORT

MAN0316-08 10 NOV 2006 PAGE 9 DIQ712 Information is subject to change without notice. SmartStack

Commentaires sur ces manuels

Pas de commentaire